Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
Last revision Both sides next revision
adding_3d_video [2016/06/19 08:36]
admin created
adding_3d_video [2016/06/19 08:41]
admin
Line 1: Line 1:
 ====== Adding 3D video ====== ====== Adding 3D video ======
  
-Mezzmo lets you add 3D video and stream 3D video to your 3D devices such as TVs.+Mezzmo lets you add 3D video and stream 3D video to 3D-capable ​devices such as TVs.
  
-Mezzmo will attempt to detect if video is 3D and set the appropriate 3D perspective. ​ You can check or change ​this 3D perspective setting: +When Mezzmo ​finds and adds videos into your Mezzmo library, it will attempt to detect if the video is 3D and automatically ​set the appropriate 3D perspective. 
-  - Right-click on the video and click Properties.+ 
 +You can check or change ​the 3D perspective setting ​for a video as follows
 +  - Right-click on the video and click **Properties**.
   - On the Properties dialog, go to the Video tab.\\ {{:​propertiesvideo.png?​nolink|Properties dialog (Video tab)}}   - On the Properties dialog, go to the Video tab.\\ {{:​propertiesvideo.png?​nolink|Properties dialog (Video tab)}}
-  - Change the Perpective ​setting to match the type of 3D video - for example, Side-By-Side (SbS), Top-And-Bottom (TaB) or Frame Packing (FrP). +  - Change the **Perspective** ​setting to match the type of 3D video - for example, Side-By-Side (SbS), Top-And-Bottom (TaB) or Frame Packing (FrP). 
-  - Click OK to save your changes.+  - Click **OK** to save your changes. 
 + 
 +**Tip:** Mezzmo uses the 3D perspective setting when:
  
 +  * Burning subtitles into the video.
 +  * Resizing videos to match your preferred video size in the **Device Settings dialog (Performance ​
 + ​tab)** or the maximum video size as defined by the selected device profile.