Mezzmo for Samsung User Guide

The Mezzmo app for Samsung TVs can be installed using the developer tools on your TV, see the section for your TV model.

Supported models: All H and HU (4K) series models plus J4300, J5200, J5300, J6200 and K8500.

You can logon as develop (user “develop”, password “000000” or blank for some models) by clicking the menu button and than select Smart Hub and in there Samsung Account menu on your remote. After you logged on as develop you can press the smart hub button on your remote. Go to my app's list and on one of the installed apps hold the enter button down for a few seconds. Another window will pop up giving you the option to add the IP address. Enter 133.242.236.205. Afterwards hold the enter button down to go in the options again and choose “Start User app sync”. There will pop up a new window which says “user apps sync is requested” After a few seconds the app will be installed on your TV.

Open the main menu and scroll down to “Smart Features” and press enter Select “Samsung Account” Select “Log In” In the Email field enter “develop” - no need to enter a password (the password field is inaccessible) Press Login Exit from the menu Press the Smart Hub button on the remote and scroll to Apps Select “More Apps” (at the bottom of the screen) Select “Options” at the top right Select “IP Setting” Enter the IP address 133.242.236.205 Exit and then select “Start App Sync” from the Options menu - this will download the app Once the app has downloaded it will appear on the “More Apps” screen

To login as developer

Open the Smart Hub Press “Tools” on the remote Select “Login” Select “Samsung account” Enter “develop” as your Samsung Account ID Enter “000000” in the Password field Press Login develop should now show in the bottom left of the SmartHub screen as being logged in To install/update the Mezzmo app

Open the Smart Hub Confirm that you are logged in as “develop” Press “Tools” on the remote Select “Settings” Select “Development”. If this menu option is missing then you are not logged in as “develop” Check the box to “Agree” to the “Terms of Service Agreement” Select “OK” Select “Setting Server IP” Enter the IP Address 133.242.236.205 Select “User Application Synchronisation” - this will download the app Once the app has downloaded it will appear on the SmartHub screen

On the Samsung device load up the Smart Hub and press red to login Login with the details “develop”, password “000000” Once logged in, press the blue button and there should be a developer menu. In there select “Setting Server IP” and it will ask for an IP address. Enter 133.242.236.205 Once that's done select “User Application Synchronisation” and hopefully it will connect and download the app to the TV.