Differences

This shows you the differences between two versions of the page.

--- mezzmo_server_not_listed_on_device [2017/12/19 23:25]
admin [Your firewall's settings]
+++ mezzmo_server_not_listed_on_device [2017/12/19 23:29] (current)
admin [Your firewall's settings]
@@ Line 30: / Line 30: @@
   * The two standard **UPnP ports** 1900 and 2869  must be allowed access through your firewall.
-**Note:** If you are using Windows firewall as your firewall on your computer, then clicking the **Configure Windows Firewall** button the **Media Server Settings** dialog will automatically configure the above firewall settings for Windows firewall.
+**Note:** If you are using Windows firewall as the firewall on your computer, then clicking the **Configure Windows Firewall** button the **Media Server Settings** dialog will automatically configure the above firewall settings for Windows firewall.
 ===== Your router's settings =====
@@ Line 36: / Line 36: @@
   * **DLNA/UPnP.** Make sure built-in DLNA or UPnP is turned off in your router's settings.
   * **Jumbo Frames.** Make sure **Use Jumbo Frames** is turned off in your router's settings.
-  * **Multicast**.  Make sure **Enable IPv4 Multicast Streams** is turned on in your router's settings.\\ \\ **Important:** After making any changes to your router's settings, turn off your router for 1 minute and turn it on again.
+  * **Multicast**.  Make sure **Enable IPv4 Multicast Streams** is turned on in your router's settings.
+**Important:** After making any changes to your router's settings, turn off your router for 1 minute and turn it on again.